Teak Oil
A special product designed for easy and quick care for hard and oily woods used in exterior environments, such as teak, mahogany, sapele, iroko and rosewood.
Epoxy resin based, double component, very fast reaction drying, solvent primer which contains highly anticorrosive zinc phosphate pigments. It is suitable for use in automatic painting machines.
It is the first and single coat, protective, pre-production primer intended for protection of steel sheets of ships, structural steel elements and other production steels from corrosion during their manufacturing, transportation and stacking.
The surfaces to be painted must be clean, dry and cleaned off of any impurities. New metal surfaces: Oil and grease on the metal surface must be removed using detergent or vapor, and high-pressure fresh water should be used to remove salt and other impurities. After the cleaning, it is recommended to rasp the surface for minimum Sa 2½ level according to ISO 8501-1 standard. The surfaces rasped must be primed with YALAZ SHOP PRIMER in no later than 5 hours depending on the environmental conditions.
Dilution / Mixing Ratio
Component A: 4 parts
Component B: 1 part
14-18 m2/liter (for a dry film thickness of 15-20 µ).
Touch Dry: 1-3 minutes.
Hard Dry: 4 minutes.
Recoat: 6 hours.
Full Cure: 7 days.
18 kg of Component A + 4.5 kg of Component B: a Set of 22.5 Kg