Acrylic copolymer emulsion based, exterior wall topcoat paint with excellent hide and matt appearance.
It is safely applied on the external surfaces of construction elements, such as any concrete, briquette, autoclaved aerated concrete, and Eternit for decoration and insulation purposes.
The surfaces where Fresco Acrylic External Wall paint will be applied should be clean and dry and cleaned off of any dirt, oil and dust and old paint residue. The rough patches on the surface should be scraped off. Cracks should be repaired using acrylic based putty. Make sure that the temperature of the surface of application and ambient temperature are between +5°C and + 30°C during application. After surface preparation is done, Acrylic Exterior Wall Primer is applied in a single coat on the surface using a brush or a roller, making sure the surface is covered completely and evenly. The application environment should not be exposed to extreme wind and air current 6 hours later, Fresco Acrylic Exterior Wall paint is applied.
Dilute with water by 10-15% for both coats. Stir the paint well before use, and do not mix the paint with another brand of paint.
1 liter of paint covers a surface of 10-12 m2 in a single coat depending on the method of application and surface.
(20°C)
First Dry: 15 minutes
Recoat: 2 hours
Hard Dry: 24 hours
It can be stored for 2 years at a temperature of +5°C to +35°C in its original packaging, in a closed environment with no direct sunlight. Protect from frost.
3,5 Kg / 10 Kg / 20 Kg
Urethane alkyd based, single component, glossy parquet polish. It is used to protect wooden and parquet surfaces from chemical and physical effects. It forms a film coat on the surfaces it is applied, protecting the surface from tea, coffee, alcohol,
Synthetic alkyd resin based primer that is used for priming wooden, chipboard, metal and plastered surfaces, which leaves no brush marks.
Long oil alkyd based, glossy topcoat paint with high physical and chemical resistance, elasticity, superior glossiness, and high scratch hardness and resistance.
Two-component, epoxy based paint modified with coal tar. It is a topcoat paint that may be used on any surface, and it may also be used as the last coating on steel and concrete surfaces to be buried into the ground due to its excellent adhesion and
It is an antifouling paint effective against any pollutant organisms created by aquatic animals.
Acrylic emulsion based, silicone added, Silk Matt / Matt, scrubbable and washable, water-based decorative interior wall topcoat.
Synthetic alkyd resin based, antirust primer with adherence and durability and high hide, which is used under topcoat paints to prevent rusting of interior and exterior iron and iron-derivative metal surfaces due to corrosive effects in the atmospher
It is a double-component, reaction drying, epoxy resin based epoxy topcoat paint cured with polyamide hardener. It adheres excellently on sheet metal, galvanized, aluminum, wooden and mineral surfaces.