Yalaz Boya

Solvent-free Transparent Epoxy

DESCRIPTION

It is an epoxy resin based, two-component, solvent-free, low-viscosity, decorative flooring material resistant to discoloration, which can be applied in a single thick coat.

PROPERTIES

• Up to 3 mm of thickness in a single application.
• Very good spread and very good adhesion on different surfaces.
• High resistance to discoloration indoors and outdoors.
• High chemical resistance and waterproofness.
• High resistance to pressure and abrasion.

APPLICATION SURFACES

It is directly applied on cement finished surfaces, or as 3D decorative coating on the patterns applied on the cement finish, or as decorative and protective coating after epoxy or polyurethane mortar, self leveling, terrazzo applications, or as protective coating on surfaces made of composite panels such as precast concrete panels, MDF, etc. to provide for resistance to humidity, abrasion and chemicals.

APPLICATION METHOD

The surface of application must be clean and sturdy. Pay attention to the recoating time of previously applied primer or intercoat. As it is a two-component product, prepare the mixture in the amounts needed at the specified ratio paying attention to the useful life of the mixture. Make sure the product temperature is not below 15°C in order to achieve a homogenous mixture. Component B is added into Component B at the specified ratio mixed with a mechanical mixer at low speed for at least 3 minutes until Components A and B are homogenously mixed. The mixture should be left to rest for 5 minutes and must be used before its useful life expires.

Dilution / Mixing Ratio

Component A: 2 parts

Component B: 1 part

Paintable (Coverable) Area

0.3 – 0.5 kg/m2

Drying Time

Hard Dry: 7 days / at 20°C

Storage

The material must be stored in a cool and dry place. The shelf life of Components A and B is 1 year in their sealed original packaging if they are stored under the right conditions.

Packaging

12 kg of Component A + 6 kg of Component B: a Set of 18 Kg

12 kg of Component A + 4 kg of Component B: a Set of 16 Kg

Important Warning: The components must be mixed well. Since the paint cannot be used after the mixture’s useful life expires, mixtures should be prepared in small amounts according to the mixing ratio in order not to reduce the product by wastage. Any surplus paint mixed with hardener should not be poured into the paint not mixed with hardener.