Yalaz Boya

Water Based Road Line Paint

DESCRIPTION

100% pure acrylic emulsion based, water based, color-fast, high-performance road line paint with high hide, high adhesion strength, resistance to harsh climatic conditions, excellent abrasion resistance, used for marking of road lines.

APPLICATION SURFACES

It is used for marking of road lines on asphalt surfaces, painting paving stones and marking of parking lots lines. If the paint is to be applied on concrete surfaces, the concrete must have been poured minimum 1 month in advance, its surface must be scored and roughened, and the paint must be applied via airless spraying. In case of application on previously painted surfaces (water-based road line paint, etc.), it is recommended to test the paint using a small amount. WARNING: It should not be applied on polished concrete machined with trowel machine and previously epoxy coated surfaces.

APPLICATION METHOD

Surface preparation: Prior to application of Yalaz Water Based Road Line Paint, the surface must be completely dry and cleaned off of dust, dirt, stone chips, etc. In case of painting paving stones, broken and missing part should be repaired or replaced first. In case of marking of road lines, avoid applying on loose surfaces and abraded aggregate surfaces as much as possible. The paint should be applied on clean and dry asphalt surface when it is not rainy and windy and when asphalt temperature is minimum 15°C and relative humidity is maximum 80%. The product must be protected from pedestrian and vehicle traffic before it completes its hard dry process (40 minutes at 23°C). If glass beads will be poured, the glass beads must be poured at the time of application, right after applying the paint in order to ensure road safety as these glass beads reflect the light in the right angle and provide night vision. When the material is first applied on the road, the glass beads will be invisible. However, after a while, they will be revealed due to abrasion by the traffic. They will continue to serve their reflection purpose in time and road lines will become glossy. Polished surfaces must be roughened prior to application. For ideal surface performance, glass beads must be added to the product and the product must be applied via airless spraying. It is recommended to use type 319 nozzle in airless systems and adjust the spraying pressure at 130-140 bars. It is also recommended to test the application first, and then continue applying the product, accordingly. The product should be applied with special paint sprayer tools. Brushes and rollers are not recommended. Brushes and rollers may be used in case of painting curbs and vertical applications. Make sure the ambient temperature is +5°C to +30°C during application and as the product dries. After each application, the application tools should be cleaned with clean water. Points to consider prior to application: • Application Tools: Stainless steel tank, airless or pneumatic machine, brush, roller. • Application tools must be stainless steel. As the paint dries fast due to its composition, it should not be kept in tank for a long time; otherwise, it may clog the sprayer. • Do not apply the product at temperatures below +5°C and above +30°C. • Apply the product as per the instructions. • Application tools must be cleaned with clean water immediately after use.

Dilution / Mixing Ratio

Ready to use; do not dilute.

Paintable (Coverable) Area

1 liter of paint covers a surface of 10-12 m2 in a single coat depending on the surface.

Drying Time

(23°C, at 65% relative humidity)

Touch Dry: 15 minutes.

Hard Dry: 40 minutes (drying time may be longer at higher relative humidity and lower temperature).

Storage

Store the material in a cool and dry environment. If stored properly, the shelf life of product is 1 year in its sealed original packaging.

Packaging

3 kg / 20 kg