Stone Varnish
Acrylic, copolymer resin based, silicone modified, transparent varnish resistant to impacts, friction, weak acids and alkaline solutions.
Polyurethane Filler Varnish
DESCRIPTION
Two-component, polyurethane based, reaction curing, easy-to-sand filler varnish with high filling capacity.
PROPERTIES
- Very high filling capability.
- Easy to sand.
- High resistance to cracking and wrinkling.
APPLICATION SURFACES
It has been formulated to be used to prepare veneer and solid wood surfaces for topcoat varnish applications. The product allows for unproblematic application of polyurethane, polyester and acrylic topcoat varnishes on top of it.
APPLICATION METHOD
Prior to application, surfaces must be sandpapered and cleaned off of any sand dust. After mixing the components at the specified ratio (100:50), the mixture is diluted with Cellulosic Thinner and applied in two to four coats in cross directions on the surfaces. The surface is sanded with sandpaper no. 220 first and then sandpaper no. 400 after 2-3hours in summer months or approximately 12 hours in winter months to prepare the surface for topcoat varnish application.
Dilution / Mixing Ratio
Component A: 2 parts
Component B: 1 part
Paintable (Coverable) Area
10-12 m2/kg depending on dry film thickness (except for application losses)
Drying Time
(20°C)
Dust Dry: 15-20 minutes
Touch Dry: 30-40 minutes
Hard Dry: 24 hours
Storage
The material must be stored in a cool and dry place. The shelf life of the product is 1 year in its sealed original packaging if stored under the right conditions.
Packaging
12 kg of Component A + 6 kg of Component B: a Set of 18 Kg
3 kg of Component A + 1.5 kg of Component B: a Set of 4.5 Kg
Important Warning
The components must be mixed well. Since the paint cannot be used after the mixture’s useful life expires, mixtures should be prepared in small amounts according to the mixing ratio in order not to reduce the product by wastage. Any surplus paint mixed with hardener should not be poured into the paint not mixed with hardener.
Grainy Flexible Exterior Wall
Acrylic emulsion based matt external wall paint with superior properties, which gives grainy texture. Thanks to its special composition, it has excellent adherence, spread, hide and ease of application. It is resistant to any atmospheric conditions.
Epoxy Intercoat Paint
Epoxy resin based, double component, intercoat primer paint. It is a highly oily primer paint applied on epoxy and shop primer paint. It has excellent chemical and corrosion resistance, mechanical resistance, adhesion and elasticity.
Polyurethane Panel Door Paint
Two-component, polyurethane based, reaction curing, topcoat paint. It forms a hard and elastic fil. It is resistant to scratches, impacts and discoloration. It is applied on panel door surfaces primed with Polyurethane Primer and properly sanded.
Exterior Wall Primer – Silicone
Acrylic copolymer emulsion-based topcoat exterior wall primer. It acts as a binding bridge between the paint and the surface and decreases paint consumption. It provides integrity with topcoat paints thanks to its composition. It expels the moisture
Fresco Ceiling
Water-based, acrylic copolymer binder based, high hide latex paint with extra matt and smooth appearance. It does not crack, blister or peel off.
Spray Paint
Fast drying, glossy, solvent based topcoat paint available in synthetic and acrylic based formulae for all surfaces including indoor and outdoor wooden, metal, concrete, plaster, and cement surfaces.
2k Acrylic Metallic Paint
Acrylic resin based, double component, reaction drying, acrylic, glossy, metallic topcoat paint with high color and gloss permanence, high UV resistance, improved mechanical and chemical resistance, which is cured with aliphatic isocyanate hardener.