Acrylic Topcoat Paint
Double-component, acrylic based, reaction curing, highly glossy varnish. It leaves a hard, glossy, plump and colorfast film. It is highly resistant to scratches, impacts and domestic chemicals.
Plaster Remover
DESCRIPTION
It is a product used for softening and making it easier to scrape off any ready-mix plaster coatings.
PROPERTIES
- As it is water-based, it does not damage or burn the surface when removing ready-mix plasters. It is not volatile since it is water-based, it stays on the surface for a long time, softening the plaster thoroughly.
APPLICATION SURFACES
It is used for removing ready-mix plaster from surfaces previously coated with ready-mix plaster (The surface of the ready-mix plaster should not be coated with any acrylic paint, etc.).
APPLICATION METHOD
One part of ready-mix plaster remover is mixed with one part of water to dilute the product. the mixture obtained is applied on the ready-mix plaster surface with a roller or a brush. The surface of the plaster coating will soften in a couple of minutes. Scrape off the plaster using a spatula.
Dilution / Mixing Ratio
One part of ready-mix plaster remover is mixed with one part of water to dilute the product.
Paintable (Coverable) Area
Depending on the surface, 1 liter of plaster remover cleans a surface of 1-1.5 m2.
Storage
Storage Conditions: It can be stored at 5-25°C without direct sunlight for two years in its original packaging. Protect from extremely high temperatures, humidity and frost.
Packaging
5 L
Hammerton Paint
A styrene-modified, alkyd resin based, air drying, silicone topcoat paint that introduces a hammered metal look on surfaces.
Epoxy Thinner
Epoxy Thinner is used to dilute all epoxy based primers and top coat varnishes and adjust them according to application viscosity. It can also be used for cleaning paint equipment applied with polyurethane based products after application.
Marine Teak Oil
A special product designed for easy and quick care for hard and oily woods used in exterior environments, such as teak, mahogany, sapele, iroko and rosewood.
Protective Cover
Protective Cover
Synthetic Lux Paint
Long oil alkyd based, glossy topcoat paint with high physical and chemical resistance, elasticity, superior glossiness, and high scratch hardness and resistance.
Epoxy Anticorrosive Primer Paint
Double component, reaction drying, epoxy resin based epoxy primer paint with polyamide hardener, high physical and chemical resistance, good adhesion properties, which creates a sturdy foundation for the paints to be applied on top and which contains
Industrial Metallic Paint
Alkyd resin based, air drying topcoat metallic paint. It is a fast-drying topcoat paint that provides for decorative and glossy appearance.