Luna Acrobat Brush
Luna Acrobat Brush
Solvent-free Epoxy Self Leveling
DESCRIPTION
Solvent-Free Epoxy Self Leveling coating is a floor coating that polishes, volumizes and smoothens new concrete surfaces or abraded, hollowed and damaged concrete surfaces. With this chemical coating, it is possible to form durable floorings quickly. Approximately one day after applying the flooring, it will be ready for walking on. Please wait for 7 days for full mechanical and chemical resistance, avoiding any heavy loads.
PROPERTIES
- High chemical resistance.
- Excellent mechanical resistance.
- Easy application.
- Polished finish.
- Waterproof.
- Hygienic and easy to clean.
APPLICATION SURFACES
It is applied in production plants, warehouses, shopping centers, workshops, aircraft hangars, schools, hospitals, pharmaceutical industry, food industry, laboratories, parking lots, purification facilities, and areas where heavy forklifts and corrosive chemicals are used.
APPLICATION METHOD
Loose parts of surfaces of application should be removed with milling cutter, sandblasting or sanding. If the surface is too glossy, it should be roughened with a milling cutter or sandblaster, and then the surface must be cleaned. Any oil on the surface should be washed away, and any impurities and dust should be vacuumed. Cleaned surfaces are primed with Solvent-Free Epoxy Primer. Solvent-Free Epoxy Self Leveling is applied within maximum 24 hours after applying the primer. If a smooth surface is desired, Solvent-Free Epoxy Self Leveling is applied with a trowel. Any gas bubbles are removed using a spiked roller. If a ragged surface is desired, depending on the level of raggedness desired, suitable size of quartzes are selected and sprinkled onto the surface. The following day, the free quartz particles are removed and the surface is rasped. Later, Epoxy Self Leveling is applied again by scraping. After the product sets, Solvent-Free Epoxy topcoat is applied with a roller.
Dilution / Mixing Ratio
3 parts of Component I and 1 part of Component II
Paintable (Coverable) Area
1 kg of product covers a surface of 0.75 m2 (for a thickness of 1 mm).
Drying Time
12 hours (drying time may vary depending on relative humidity and temperature) Chemical curing 7 days.
Packaging
18 kg of Component A + 6 kg of Component B: a Set of 24 Kg
Heat-resistant Paint
Silicone resin based, non-chlorinated, semi-mat, heat-resistant topcoat paint with high physical and heat resistance. It is a paint that does not require priming prior to paint application, has good adherence on the application surface and has high p
Epoxy Coaltar
Two-component, epoxy based paint modified with coal tar. It is a topcoat paint that may be used on any surface, and it may also be used as the last coating on steel and concrete surfaces to be buried into the ground due to its excellent adhesion and
Yacht Varnish
Urethane alkyd based varnish that provides excellent drying in interior and exterior environments. It is a solvent-based glossy varnish that does not crack and protects wooden components of yachts from the damaging effects of sea water, rain and sun.
Epoxy Thinner
Epoxy Thinner is used to dilute all epoxy based primers and top coat varnishes and adjust them according to application viscosity. It can also be used for cleaning paint equipment applied with polyurethane based products after application.
Extra Satin Yellow-striped
Extra Satin Yellow-striped
Exposed Concrete Primer
Acrylic emulsion-based primer paint. It is an exterior wall primer used for increasing surface performance prior to plaster and cement based rendering applications on exposed concrete.
Epoxy Roller
Extra Satin Yellow-striped